Why does my Chainsaw cut Crooked?

A chainsaw is a great way to remove trees and branches that are too big for you to handle with an ax. With its ability to cut at the base of the tree, it can be used for many different purposes.

A chainsaw cuts crooked when the chain is too tight or too loose. The first thing you should do is tighten up your chain by adjusting the tensioning knob on top of the saw’s bar.

You want to turn it clockwise until you feel resistance, then back off just a little bit so there’s some play between the blade and guide bar without any side-to-side movement at all.

Now, make sure your chain is sharp. The teeth should be very straight and clear of any chips or deformation (like a saw blade’s tooth after cutting through metal). If you notice that one or more are chipped, the entire thing will need to be replaced since all the other blades would also have been damaged by now.

How to sharpen a chainsaw that cuts to the right

If your chainsaw is cutting to the right, then it may be time for you to sharpen it. Chainsaws make a huge difference in the safety and efficiency of homeowners, so it is important that they are sharpened properly.

chainsaw problems

Sharpening your saw can seem intimidating at first glance, but there are some simple steps you can follow to make this job easier.

1) Pull off any excess material from around the blade using pliers or wrenches

2) Place a file on top of the teeth near the end where they meet with another tooth

3) Push down firmly while moving back and forth in one direction until all teeth have been filed evenly

4) Remove any burrs by holding fine-grit sandpaper on top of each tooth and filing lightly until smooth

If you do not have the tools available to sharpen your chainsaw, it is best for you to contact a professional. They will be able to give your saw back its sharp edge and ensure that it is properly maintained at all times.

Why does my chainsaw cut a curve

It can be hard to figure out why a chainsaw cuts the way they do. The most common reason is that you’re putting on an angle with the chainsaw. When this happens, your saw will naturally cut in a curve and not straight lines.

When most people think about cutting with a chainsaw, they envision an individual making quick work of some logs at home or on their property. We all know that there is more than meets the eye when it comes to this tool and if we want to make sure we are getting the best cut possible, we need to understand what is going on behind the scenes.

The teeth of a chainsaw work in a way that is similar to a conveyor belt. The chain comes around and grabs the wood, causing it to move back into the guide bar for cutting. When you are making an angled cut with your saw, this can cause some pretty severe kickback because the blade only meets part of what needs to be cut. This makes it much more difficult for the blade to do its job and will cause you trouble in return.

When this happens, your saw is going to give you a curved line because of how it’s cutting through the wood at an angle instead of straight across like you would want.

If you are trying to decide between using this tool for a small project or calling someone in to do it for you, consider the fact that one curved cut is more than enough reason to go with the professionals.

Why does my chainsaw keep jamming?

If your saw keeps jamming while cutting through wood, there are many different things that could be causing this issue. Unlike other tools, the saw is designed to prevent you from getting injured when it jams. This means that generating a lot of force on your part will not cause injury, but it can damage or break your chainsaw in some cases.

Key differences between the Chainsaw and Hedge trimmer

The most common cause for this happens when people try to cut down trees with their tools instead of cutting them into manageable size logs. The weight of the tree can cause your blade to bend, which will eventually lead to it jamming in place while cutting through wood.

Another thing that you need to be aware of is what kind of logs are being cut into pieces with your saw. If they are wet or softwood trees instead of hardwoods, this can lead to jamming as well.

The easiest way to prevent this issue from happening is for you to use your saw the right way and only cut logs that are manageable in size. Chances are if you find yourself getting frustrated with how often it jams or stops while cutting through wood, there is a bigger problem at hand than just your chainsaw.

Why does my chainsaw produce smoke?

Smoke coming from a running saw is not an unusual sight for people who are working with this tool every day. Many of these users know that it means there is excess material or buildup in the oil, but others may wonder what causes their machine to do this.

The most common reason for this to happen is that you are not adding enough oil or your saw has been running for a long period of time. When the machine starts heating up, it will cause some excess smoke in order to let off steam and prevent itself from over-working.

Another reason why there might be more smoke coming out than usual while using your chainsaw is because of improper maintenance. If oil levels are too low or you have failed to replace the filter, this will cause your machine to produce a lot more smoke than usual when in use

If you notice that there is plenty of oil in the saw and it has been running for less than an hour before producing excess amounts of smoke, chances are that you are just using the wrong oil for your machine. This is not something that will cause any damage, but it can be frustrating if your saw does this all of the time when cutting through wood