Stihl chainsaws are hard to start because the company designs them to help avoid injury to the user. The saw must be held in a certain way and pulled with enough force to start the blade, which can be difficult for some people.
There are a few tips and tricks that can help make starting a Stihl chainsaw easier, but it may still be a challenge for some users.
The reasoning behind this is that if the chainsaw is easy to start, people will be more likely to use it without proper safety gear, which could lead to serious injury.
Thus, making the chainsaw harder to start acts as a deterrent to unsafe usage.
If you are having difficulty starting your Stihl chainsaw, make sure you are following the correct procedure.
First, check that the saw is properly lubricated and the chain is not dull. Next, ensure that you are holding the saw correctly and pull the cord with enough force. If necessary, ask someone else to help you start the saw. With a little patience and practice, you should be able to start your Stihl chainsaw without too much difficulty.
Is there a trick to starting a Stihl chainsaw?
If you are following the correct procedure stated in your chainsaw manual then your Stihl chainsaw should start quickly and easily. However, if you are still struggling to get your chainsaw started, there are a few tips that may help.
One reason may be that you’re not storing the gasoline correctly. Another reason may be that your spark plugs aren’t working properly. And finally, you might not be following the correct starting procedures.
Make sure that the saw is properly lubricated. If the chain is too dry, it can cause the saw to bind and be difficult to start. You can lubricate the chain by squirting a little oil onto it before you start cutting.
If you’re still having difficulty, try priming the saw. To do this, open the choke all the way and pull the cord slowly until you feel resistance. Then close the choke halfway and pull the cord quickly and firmly. This should help get the engine going.
A few other tips to help you get your Stihl chainsaw started:
- Store the gasoline in a clean, dry container.
- Check the spark plugs and replace them if necessary.
- Be sure to follow the correct starting procedures.
With a little troubleshooting, you should be able to get your Stihl chainsaw started in no time.
Why does my chainsaw take forever to start?
The most common reason for a chainsaw not starting is if the engine has been flooded with gas. This issue can usually be visualized by opening up your machine and seeing water near or inside of it, as well as smelling fuel in between spark plugs (or on top).
If your chainsaw has been flooded, you’ll need to take the following steps in order to start it:
First, remove the spark plug and clean the area around it. Next, find the carburetor and open up the choke all the way. After that, locate the primer bulb and press it a few times. Finally, put the spark plug back in and try to start the chainsaw again.
If you’re still having trouble starting your chainsaw, it’s possible that there is an issue with the fuel lines or the carburetor. These issues are best fixed by a professional technician.
How do you start a stubborn chainsaw?
If your chainsaw is being stubborn and still won’t start, there are a few things you can try.
There are two ways to start the engine. The first way is to move the lever to the full choke position and pull the starter rope 3 or 4 times. If that doesn’t work, move the choke lever to half choke and pull the starter rope 6 times maximum.
If neither of those work, it’s possible that there is an issue with the fuel lines or the carburetor. These issues are best fixed by a professional technician.
With a little patience and practice, you should be able to start your chainsaw without too much difficulty.
