Chainsaws are one of the most versatile tools in a homeowner’s arsenal, capable of performing a variety of tasks such as cutting down trees, trimming branches, and even clearing brush.
Different people often have different opinions on the best way to operate a chainsaw. Some prefer to use the chainsaw with both hands for greater control, while others find that working with one hand gives them more power and precision.
Two-stroke chainsaw engines can be at full throttle without stalling, putting less stress on the engine. They also tend to be more polluting and are more expensive to maintain than their four-stroke counterparts. If you are looking for a chainsaw that is easy to use and powerful, then two-stroke engines might be a good choice for you.
Running two-stroke chainsaws at full throttle when cutting thick pieces of wood or timber can also help to prevent damage to the blades. It is important to be careful when using chainsaws and always have safety gear to hand.
Pros of Running a Chainsaw at Full Throttle
There are a few benefits to running your chainsaw at full throttle. One is that it will save you time. If you’re working on a big project, being able to cut through material quickly can be a huge advantage.
At full throttle, you also work more efficiently because you’re not having to stop periodically to let the blade cool down.
Running your chainsaw at full throttle can also help prevent kickback. Kickback is when the tip of the saw kicks up toward you while you’re cutting, which can be dangerous. By running the saw at full throttle, you’ll be less likely to experience kickback.
Cons of Running a Chainsaw at Full Throttle
There are also some drawbacks to running your chainsaw at full throttle all the time.
Primarily, it can put unnecessary wear and tear on the chain blade and shorten its lifespan. For people new to chainsaw use, it can also be harder to control saws running at full speed, increasing the risk of accidents or damage.
Chainsaws also generate a lot of heat when they’re running at full throttle, which can be dangerous for both the operator and any bystanders.
How to adjust chainsaw throttle.
- Before starting, use a flat screwdriver to clean any debris out of the holes and tighten all screws. This will help keep you safe while working with your chainsaw.
- Use the flathead screwdriver to turn the idle speed adjustment clockwise until the engine won’t function properly at idle. This will increase the speed of the engine.
- The next step changes how well your chainsaw idles in different situations. By making this adjustment, you can eliminate popping and stalling that might be caused by things like weather changes or using a different type of gasoline.
- Then use the throttle trigger to slowly decrease the engine speed until it reaches a safe operating range.
- If you need to adjust the speed further, repeat this process as necessary.
There are some instances where running the chainsaw at full throttle might be the only way to get the job done quickly and safely. For example, if you’re cutting through a large tree trunk and need to clear the area quickly, running the chainsaw at full power might be your best bet.
The same goes for if you’re cutting through tough brush or overgrown grass. In these cases, running the chainsaw at full throttle can help you get the job done more quickly and with less effort.
Of course, you should always use caution when running a chainsaw at full power. Always be sure to wear proper safety gear when using a chainsaw, and pay close attention to your surroundings so that you can avoid injuries or accidents.