5 Common Problems With Husqvarna Chainsaw (2024)

The numerous demands of forestry professionals spurred the creation of one of the world’s best and most innovative chainsaw – the Husqvarna Chainsaw. This saw is one of the first rated saws globally, both in quality and in price.

Over the years, research has shown that as time passes, mechanical equipment like your chainsaw, fan, and vacuum cleaner tends to depreciate. The more you make use of these machines, the more it loses its efficiency as it gets old. The Husqvarna chainsaw is not left out.

The Husqvarna chainsaw comes in different models, and these different models have their problems, despite these individual problems associated with the different brand, there are also standard issues that they all exhibit. Read on to identify these shortcomings, in here you will find some of the possible solutions to rectify the problems you might encounter.

Chainsaws are one of the most efficient and powerful tools of this our modern age. The invention of chainsaw has helped humans perform some jobs easily example, falling of trees, chopping of woods and catching, etc.

If you are familiar with chainsaws, you will know that they require a high level of maintenance to keep them in perfect condition. Careless handling or poor maintenance culture may result in your saw developing problems. This is why this article has been put together for a helpful guide.

5 Common Problems With Husqvarna Chainsaw

Common Problems With Husqvarna Chainsaw

These are some of the problems associated with Husqvarna chainsaw;

  1. Trouble Shooting Husqvarna Chainsaw

One of the most common problems associated with Husqvarna chainsaw is troubleshooting. It is a common problem associated with all models of Husqvarna saws. This can be as a result of dirty air filters (clogged air filters draw more gas than air). Running a saw with clogged air filters increase the number of carbon deposits as the engine products more unburned fuel.

See also  How to Stack Split Firewood

Another cause could be a faulty spark plug, you can remove the spark plug and clean it before starting your chainsaw, or it might be bad and needs replacement.

A rush chain link can also be a problem in troubleshooting your Husqvarna chainsaw; all you need do is to replace it.

  1. Stalling

Why does my Husqvarna chainsaw stall? This may be as a result of a clogged spark arrestor. This is a small screen that prevents the engine from emitting sparks. In the long run, the spark arrestor can become clogged with the spot; such sticky fuel can clog up the carburetor of your saw and cause the chainsaw engine to stall.

  1. Clogged Oil Ports

A typical chainsaw has two oil inlets at the rear of the bar, which can get clogged easily. Whenever you have the bar dismounted, take a small wire and clean it thoroughly before remounting so that you can prevent any issues with a lack of lubrication.

  1. Chattering Of The Chain

The chain is the most detrimental area with the most numerous issues because it experiences more of the workload among all other parts of the chainsaw. Chattering is one of the problems associated with the chain.

If the air is filled with sawdust as you cut wood chips or if the cuts are curved in nature, know it is time to sharpen your chain. You can sharpen the teeth of your chain with a round file of the appropriate size for your model.

  1. Looseness And Vibration

When you use your chainsaw, you experience high vibration; you may need to adjust the tension of the chain and note most chainsaw tends to loosen over time. The most modern chainsaw has a secure external means of improving the tension.

This helps you to tighten the chain until it fits snugly on the bar and can still be turned by hand without resistance.

  1. Chainsaw Keeps Turning

If your chainsaw doesn’t stop turning, then it could be as a result of a faulty clutch or the return springs that help the clutch engage or return is bad – if you do not release it, the chain will not move.

See also  Do You Start A Chainsaw With The Brakes On?

Also, if the clutch pads have grown sticky, all you need do is to replace the entire clutch assembly.

  1. Clogged Carburetor

This can be as a result of unburned fuel left in the carburetor. All you need do is drain excess fuel by repeatedly yanking the pull start to clear the fuel off – the chainsaw will start immediately.

Note: make sure to disengage your starter to allow more fuel to drain faster.

8. Filthy Filters

The air and fuel filters of your saw need to be cleaned frequently or replaced when damaged, depending on the type of filter your chainsaw uses. A plastic filter is effortless in maintenance, you can wash with soap and water, while others may require the use of a solvent.

While you are cleaning your air filters, you may want to consider cleaning your carburetor and also checking the throttle of the saw at the same time.

You can also rinse the screen on the fuel filter with solvent, though removing it to perform this task may require a little more work and extra carefulness since you have to fish it out.

  1. Stiff Guide Bar Grooves

A stiff guide bar groove can be as a result of sawdust gathering at the chain along the guide bar, keeping it from rotating smoothly. Some nicking might be experienced as you use it. To rectify this problem, you can remove the cover from the drive case, the chain, and the bar.

Then use a small screwdriver to clean the grooves. In the case of smaller areas, a piece of wire would do a much better job. Look out for nicks and with a file flatten them out, using strokes that are perpendicular to the flank of the bar.

Chainsaws are no doubt, powerful tools, but they do come with inherent problems that seek immediate attention. These problems range from minor to detrimental and can pose a danger if not addressed quickly. If you are not familiar with your chainsaw’s built and how it works, it is imperative to seek professional help.

See also  Chainsaw Teeth Types

5 Common Problems With Husqvarna Chainsaw

A number of these problems associated with chainsaws can be averted by simple maintenance tips, which are listed below;

Simple Maintenance Tips

  1. Regular cleaning; this involves making sure all essential parts of your chainsaw are clear of debris at the beginning and end of every session you decide to use your chainsaw. Other potential problems include the sprocket nose, clogged oil inlet hole, the groove bar, and sharpening of the chain – cleaning eradicates these issues.
  2. Rotate the guide bar and remove burrs after each chain has been sharpened or replaced.
  3. Regular inspection of chain tension and frequent lubrication. Always check your chain tension frequently, most importantly, when you first purchase your saw and lubricate periodically to avoid stiffness and rusting (chain).
  4. Always keep the chain sharp; dull chain makes work miserable and impossible. Therefore you must use the proper file size, file it evenly, and at the correct angle. Apply caution while using the depth gauges.
  5. Always keep your air filters clean because this improves operation and prevent common problems associated with chainsaws like closed air filters.
  6. Don’t race the engine of your chainsaw when you aren’t cutting, and make sure you use only acceptable cutting techniques suitable for your chainsaw.
  7. Use fresh gasoline; keep in mind that gas oil mixture can quickly break down when not in use – leading to gum and sludge that can clog the machine, the plug, and the carburetor.

Never mix your fuel to the last more than 30 days because it breaks down after thirty days.

Final Thoughts on the Common Problems With Husqvarna Chainsaw

Though there are different brands of chainsaws -Husqvarna, Stihl, Echo- most of these saws share common problems, which can easily be rectified or adverted by adhering to simple maintenance tips and safety requirements stated above.

Still, you can encounter depreciation, which is the wear and tear of a machine, but you can put it off longer by keeping its part in better working order. Many chainsaw repairs are quick and straightforward and do not cost much; it can be self-handled, but if you can’t get the hang of it, feel free to consult a professional.