Chainsaw Direction of Blade

Chainsaws are one of the most popular tools in a home owner’s arsenal and the blades are very sharp for the tasks they are required for. They’re perfect for chopping up tree limbs, clearing brush and making your yard look nice.

If you move it the wrong way, not only will this cause an accident to yourself or something else nearby, but your chainsaw blade may also be damaged in the process.

When you need to use your chainsaw, how do you know which way the blade should go? Chainsaws work best when the cutting edges of your chain are facing away from you. This is usually accomplished by placing the engine on the right side and making sure the chain rotates in a counter-clockwise direction with the sharp cutting edges facing away from the engine.

If you’re a chainsaw expert, then you’ll know that even the most minor of mistakes can cause significant damage to your equipment and potentially injure you in the process.

A chainsaw is a powerful tool, but it can also be your worst enemy if you’re not careful. If the blade becomes blunt or breaks off and needs to be replaced, always remember that there are two different ways of installing the new one: left-handed or right-handed.

Think about which way will work best for you before making any decisions so as not to cause damage by going against what’s written in the owners manual. The chain should always go in the “righty tighty” direction (or vice versa) because this ensures proper tensioning during use when tightened with an Allen wrench through its axle nuts. Without enough tension applied at these points, over time the material being cut may end up jammed between cutting surfaces.

How to tell the Direction of a Chainsaw Chain

If you’re a homeowner, chainsaws are a staple in your toolbox. If you’re unsure of how to tell the direction of a chainsaw chain, don’t worry! This blog post will teach you everything you need to know.

See also  How Good are Battery Powered Chainsaws? Are They Safer?



So why does a chainsaw blade need to run in the right direction? The answer is simple: it won’t function correctly and could be dangerous. Why would you want that when there are other options for dealing with your problem, such as using an electric saw instead of using a chainsaw that is difficult to control if it’s not working properly? It’s super important that people make sure they’re using their chainsaw correctly before proceeding with any cutting or trimming jobs.

Chainsaws have one moving part that keeps the chain tight so that it doesn’t come off and spin around wildly while you’re trying to cut something. The engine of the saw will tighten up the chain automatically as well if you let go of the throttle trigger on the handle for too long.

Chainsaws are not designed to run in reverse to the direction that they were originally made – with all of its cutting blades facing towards your body instead of away from it. This is why safety precautions should always be taken before operating this tool – and yet many people continue risking their lives without any understanding of how potentially life-threatening their actions can be.

Chainsaw Chain Direction Picture

A chainsaw has many benefits. One of these is the ability to cut through thick tree parts with ease, making it an efficient and effective way for clearing large areas. However, if you’re not using this machine in a safe manner then all that power can be used against you – putting the user at risk from injuries like bone fractures and severe cuts!

See also  Why does my Chainsaw cut Crooked?

For those unfamiliar with how to use this tool properly, understanding what direction should go on which end might seem overwhelming and confusing. In order to know whether your blade orientation is correct (and stay as healthy as possible), take note of one very simple indicator – ‘the chainsaw teeth‘.


Chainsaw Chain Direction Picture


View from Above

Chainsaws rely on the chain and blade to cut through whatever material you’re working with. The top of a chainsaw’s saw-blade has two edges, one sharp and one dull.

When the blade is rotating clockwise as it should (you can tell by looking at its direction), then the chainsaw blades will move in an upstroke motion that cuts into what they hit.

The direction of a chainsaw’s blade always rotates clockwise – if it does not rotate this way then something may be wrong with the engine or tensioner which needs to be fixed immediately.

A key thing to look out for when inspecting your chainsaw to see if it has been properly set up for use is by looking at its teeth. Both sides should look like they’re lined up correctly.

View from the Side

The blade’s direction should be from left to right, that is a clockwise direction; otherwise, your blade will run in the wrong direction. To check if you have placed it correctly, look at where the chainsaw engine and its chain are located.

The chainsaw engine should be on this same side to ensure optimal performance for cutting tasks. If not set up correctly, then the chainsaw will run in the wrong direction which would mean wasted work time due to poor results.

See also  The Top Ten Chainsaw Brands

View from Below

The chainsaw blade will have the opposite appearance when viewed from the top as opposed to looking at it from below. You can check this by seeing that if your chain replacement direction is done correctly, then you should be able to see how sharp edges of a rotating clockwise motion.

The bottom of the blade should be facing towards the engine or body, while its sharp edges are rotating from clockwise to counterclockwise.

Replacing your Chainsaw Chain

If you’re not too sure about how to replace the chainsaw chain, then follow these simple steps:

  • The first thing that needs to be done is to take off any objects blocking your view. This could include a safety guard or anything else in between what’s being worked on and one of the eyes.
  • Next up, check if there are two nuts at each end of the handle. If this applies to your model of chainsaw, unscrew them from left to right by twisting with both hands using an even pressure so they don’t come loose suddenly while tinkering around with other things underneath and causing damage.
  • Next, take out the old chain and discard it. Make sure to not forget about the oil that’s still in there as well because if you don’t put new chainsaw oil on this piece of equipment before using it again, your new chainsaw chain might not work as efficiently as it should.
  • Carefully replace the chainsaw chain and make sure the teeth are facing down and that it’s all lined up properly. Check to see if there is a gap between any of them or anything else in-between because this could cause injury when using it next time.
  • Then, tighten each side nut by the handle and then use your wrench or Allen key to make sure everything is tight and nothing has come loose.